Langsung ke konten utama

Postingan

Menampilkan postingan dengan label Production Waste

Reloading of Articles Led to Waste Time

Too many points of suspension or temporary storage at the plant will also cause problems. Obvious problems that will occur will lead to waste time, especially for work loading and unloading of materials from the conveyance or removal of the means of conveyance. Activities will be spent loading and unloading articles operator. It also will cause a lot of waste time. This possibility will always occur repeatedly in the event queue before being processed articles. In standard conditions should be placed near the production machines, but because of the place is full then placed around the place occupied by the material should not have to wait for production.

Rapid Processing Machine

Generally, the engine speed is very favorable for the production process, as it saves time and cost for labor. The result will be doubled compared with manual processing. Accuracy and uniformity of products can be relied upon. Today, the companies vying to do the automation of production processes with the engine speed is a top priority to meet the expected efficiency. With careful planning automation will become the main weapon to dominate the market. But there are benefits besides manufacturing actors must also be vigilant against possible losses caused by such automation.

Over Personnel - Over Equipment

Over personnel in question is an excess of human resources who carry out production process. Management of production is always the balance of human resources and production machines to run a product. For the efficiency of machines and workers can be achieved then the composition of the two must be balanced. In addition, there is no idle cultivated for both machines and human activity. The advantages of human resources not only caused by problems of recruitment and placement of employees is wrong. However, it can also be caused by fluctuations in product demand , which causes one section to another section had to stop because it has reached the target.

The Possible Cause of Over-Production

Many possibilities that occur in the production process that causes excess production, thus causing a serious abnormality . If not resolved properly, it will cause a further effect and shake the stability of the company. In general, we can be sure of over-production because production management errors that are not controlled. Production Manager is the first person responsible for this abnormality, because those who regulate the production stability. However, knowledge about the “possible cause” of an abnormality in the production process must be owned by all employees, because it will make it easier where you wish to take action.